How to Clean and Store Your SVAKOM MORA NEO
By SVAKOM | Premium Interactive Sex Toys for Modern Intimacy | Published: 2026-11-04
Category: Consejos y cuidado
A step-by-step routine for cleaning the SVAKOM MORA NEO's dual-motion rabbit design, drying it fully, and storing it so the silicone and motors stay in good shape.
Quick answer
Clean the MORA NEO after every use with a mild soap or dedicated toy cleaner and warm water, paying extra attention to the seam between the internal and external arms. Dry it completely before storing it in a clean, dry place away from direct sunlight.
Why the dual-motion design needs a little extra attention
The MORA NEO combines internal and external movement in a rabbit-style shape, which means there are more curves, crevices, and moving parts than a simple straight vibrator. Lubricant and body fluids can collect where the two arms meet, so a quick rinse is not enough on its own.
You do not need a cabinet full of specialty products. A mild, fragrance-free soap or a toy cleaner labeled safe for silicone, plus warm water and a soft cloth, covers the routine. Avoid harsh household cleaners, alcohol-heavy sprays, and abrasive scrubbing, which can degrade the surface over time.
What to skip if you want the toy to last
Do not submerge the toy or run water directly into any charging port or button area, even if the body feels sealed. Wipe and rinse the silicone surfaces rather than soaking the whole device.
Skip the temptation to store it while damp. Trapped moisture is the most common avoidable cause of odor, sticky residue, and surface wear, and it is easy to prevent with a few minutes of air drying.
Your MORA NEO cleaning and storage steps
- Power off and remove the sleeve or attachment: Switch the MORA NEO off before cleaning, and take off any removable part so you can reach the surfaces underneath. Common mistake: cleaning while it is still running or charging. Never clean a toy that is plugged in.
- Rinse the silicone with warm water: Hold the toy under a gentle stream of warm, not hot, water and rinse the external arm and the inner curve. Checkpoint: hot water is uncomfortable to touch and offers no cleaning advantage.
- Wash with mild soap or toy cleaner: Apply a small amount of fragrance-free soap or silicone-safe toy cleaner and work it into the seam between the arms with your fingers or a soft cloth. Common mistake: using shower gel or scented soap, which can leave residue.
- Scrub the seam and buttons gently: Use a soft brush or cloth around the base of the external arm and the control buttons, where lubricant tends to gather. Checkpoint: if you feel grit, rinse and repeat rather than pressing harder.
- Rinse thoroughly and check for residue: Rinse until the water runs clear and the surface no longer feels slippery. Common mistake: leaving soap film behind, which can irritate skin and dull the silicone.
- Pat dry and air dry completely: Blot the surface with a clean, lint-free towel, then let the toy air dry in a well-ventilated spot before putting anything away. Checkpoint: the seam between the arms should feel dry to the touch. If you are in a hurry, dry the seam first; it holds moisture the longest.
- Store in a clean, dry place: Keep the MORA NEO in a pouch or box away from direct sunlight, heat, and other silicone toys that could press against it. Common mistake: storing it in a bathroom cabinet where humidity stays high.
MORA NEO at a glance
- MORA NEO: Rabbit-style dual action combines internal and external movement in one body. The two arms create a seam and inner curves, so cleaning needs to reach beyond the outer surface.
MORA NEO
